How to check vehicle odometer tampering

 

How to spot a clocked vehicle:

Inspect the actual condition of the vehicle:

   Older cars are generally well built but there is a possibility that the car’s odometer readings can be altered, this makes it more difficult to judge the miles on just viewing alone, and you would need a used car check to know in detail.

Look inside for worn steering wheels, seats, pedals and switches, look for any red flags like unusual wear or tear, or maybe a dent (this can be found out using a magnet).

Examine the service history:

Check the service history of a vehicle and find out whether mileage is genuine or not. Check the condition of the car, and you might be able to tell if the wear and tear is consistent with the mileage.

A full car check report reveals if the vehicle has been properly maintained during its life period, find out if the mileage recorded is genuine using previous MOTs.

Inspect the vehicle’s MOT certificates:

First of all, you must check the MOT certificates and look where the mileage is recorded and ensure there are no odd gaps or points where the mileage is lower than preceding one. Before buying the car, you must check the past MOT records and tests, while inspecting online using just the registration number.

Check the odometer condition:

Check vehicle odometer visually and find out alignment changes, numbers mismatch or if the odometer got damaged physically, it is also rare to see an old vehicle with a new odometer in its place, these are signs that indicate a clocked odometer.

 Take it for a test drive:

 A clocked car could have an awkward gearbox, worn brakes, clutch and tired suspension. So, at the time you drive, listen out for clonks from the engine and other components that will give away the truth about a car’s mileage, that it hasn’t been regularly serviced and proper maintained. A test drive can protect you from expensive damage where you may be buying too hastily.

Raise questions against clocking:

If there is any difference between a car’s mileage and its service history or condition, raise your questions against the condition of the vehicle and then make sure you clarify with the dealer. Don’t proceed further without proper research.

Process involved during mileage clocking:

Vehicle odometer digits can be physically changed while on the dial. Most modern vehicles having digital odometer can be easily re-programmed to display incorrect mileage and indicate a discrepancy in the ECU by making a dot on the LCD counter. There are various programs available to crack such software, but usually, it can be found out.

How to overcome from mileage clocking:

Mileage clocking has affected hundreds of thousands of vehicles in the UK for increasing the value of the vehicle in the market. Mileage Clocking can be checked with CarDotCheck, get simple reports to identify any clocking that appears on your vehicle. Our mileage check protects you from buying an unworthy vehicle and saves your money significantly.